Adhesive 62Xpc
Permanent, transparent acrylic based adhesive
Technical data
| Tack | high | |
| Peel adhesion | high | |
| Shear | extremely high | |
| Minimum application temperature | 0 °C | |
| Service temperature | -30 to 80 °C (up to 95 °C for short periods) |
Application and use
The adhesive 62Xpc is specially developed for filmic face material. Through the use of 2-layer technology and ideally optimised layers, the conversion properties become excellent and the adhesion properties are above average. A good wettability combined with a high transparency of the adhesive layer give a visually appealing result. Once applied the adhesive is insensitive against humidity, soaps and oil and therefore suits specially well for product labelling in hygiene and cosmetic industry. It features good resistance to light, heat and aging.
Processing
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
All ingredients of adhesive 62Xpc comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).
The pressure-sensitive adhesive 62Xpc can be safely used for the back coating of labels for labelling of foodstuffs for storage at room temperature or below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. With regard to the results of the formulation evaluation and the migration analyses it can be derived that the adhesive grade does not have a harmful effect on the content of blood bags and that the requirements of the standard mentioned above are met in this case (EN ISO 3826-1 "Plastics Collapsible Containers for Human Blood and Blood Components, Part 1: Conventional containers, Paragraph 8.5 label requirements"). Declaration of no objection valid until 18.08.2024
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
