Adhesive 62Dps
Permanent, acrylic based adhesive
Technical data
Tack | very high | |
Peel adhesion | very high | |
Shear | very high | |
Minimum application temperature | 0 °C | |
Service temperature | -30 to 60 °C |
Application and use
Adhesive 62Dps shows good adhesion specially on packaging films, also at low temperatures. Due to the very high initial tack 62Dps is particularly well suited for high-speed dispensing systems. Because of its multi-layer construction 62Dps shows extremely low tendency for migration and is suitable for direct contact also with fatty foodstuff with limitation (correction factor). 62Dps is less suitable for curved surfaces.
The adhesive has a good aging, heat and light resistance.
Processing
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
All ingredients of adhesive 62Dps comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).
The pressure-sensitive adhesive 62Dps can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 27.09.2025).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.